VigorAP 906
2x2 Dual Band WiFi 6 AP
- WiFi 6 Dual-Band
- Maximum Data Rate: 3 Gbps
- Wall / Desktop
WiFi 6 Wall-Mount/Desktop AP
VigorAP 906 is 11ax wall-mount/desktop wireless access point with a 5-port LAN switch. With wire-liked link rate up to 2402 Mbps in 5GHz band and up to 574 Mbps in 2.4GHz band, it’s suitable for high density environments. It can be cloud-managed by VigorACS*, and also act as the mesh Root AP to manage up to 7 mesh node APs in LAN
Three modes in one
Utilize Transmission Opportunity with OFDMA
OFDMA has been used in LTE for many years, and is now available in 802.11ax for multi-user mode.
Traditionally with OFDM, each frame is transmitted across the entire channel width. With low-rate transmission still using the whole channel, it brings latency and jitter to others and lower the overall efficiency.
OFDMA splits a single transmission into groups of subcarriers, and each subcarrier can be used by different client. With multiple clients transmitting simultaneously in the same channel, it improves efficiency of every single transmission opportunity and thus increases the wireless experiences in high density environment.
AP-assisted Roaming
Proactive Roaming
WiFi clients automatically hand-off to another AP/Router with a better signal strength when moving around in an area with multiple APs/Routers.
However, WiFi clients sometimes stick to the AP/Router with weak signal, and not switching to the one with better signal.
Assisted Roaming
VigorAP will disassociate the WiFi clients who are out of the effective transmission range, forcing them to pick up another AP/Router with a stronger signal.
Stronger Signal Guaranteed
Furthermore, with "Minimum RSSI with Adjacent AP" option, VigorAP can disassociate the client only when other AP/router has a stronger wireless signal, and keep client stayed when there’s no other AP/Router nearby.
Interface |
|
| LAN Port | 5x 10/100/1000M Base-T, RJ-45 (PoE+) |
| Antennas | 2x External dipole DB |
| Button | 1x Factory Reset Button |
| DC Power Jack | 1 |
| Security Lock | 1 |
Capacity |
|
| 2.4GHz Peak Speed | 574 Mbps |
| 5GHz Peak Speed | 2402 Mbps |
| Max. Number of Concurrent Active Clients | 127 (128 per radio band) |
WLAN |
|
| 2.4GHz Standard | IEEE 802.11b/g/n/ax 2x2 MIMO |
| 5GHz Standard | IEEE 802.11a/n/ac Wave 2/ax 2x2 MU-MIMO |
| Operating Mode | AP, Mesh Root, Mesh Node. |
| Roaming | AP-Assisted Roaming, PMK-Caching, Pre-Authentication |
| AirTime Fairness | Yes |
| Band Steering | Yes |
| OFDMA | Yes |
| Max. Number of SSID | 8 (4 per radio band) |
| WDS | Yes Repeater |
| Client Numer Limit | Per radio, Per SSID |
| WMM | Yes |
Security |
|
| Security Mode | WPA3, WPA3/WPA2, WPA2, WPA2/WPA, OWE, WPA, WEP, None |
| Authentication | Personal, Enterprise |
| WPS | PIN, PBC |
| Hidden SSIDs | Yes |
| MAC Address Filter | Up to 256 entries |
| Wireless Client Isolation | Yes |
| Mobile Device Management | Yes |
Application |
|
| Built-in RADIUS Server | Yes |
| RADIUS Proxy | PEAP, EAP-TLS |
| Hotspot Web Portal | Yes |
| DHCP | DHCP Server, DHCP, Client, DHCP Relay Agent |
| Static IP | Yes |
| MAC Clone | Yes |
| 802.1q VLAN | Yes |
| Schedule | Auto-Reboot, Wi-Fi Up/Down, LED On/Off |
Management |
|
| Local Service | HTTP, HTTPS, Telnet |
| Configuration | Stand Alone, TR-069 (VigorACS), VigorRouter APM, VigorAP Mesh Root |
| Firmware Upgrade | HTTP, TFTP, TR-069 |
| Tools | Speed Test, AP Discovery, Statistics, Interference Monitor |
| Configuration Backup and Restore | Yes |
| Syslog | Yes |
| Notification Alert | Yes |
| SNMP | v1, v2c, v3 |
| Mesh | Node, Root |
| Mobile Device Management | Yes |
| Managed by VigorACS | Yes |
| Central AP Management | Up to 30 VigorAP |
Physical |
|
| Environment | Indoor |
| Mounting | Desktop, Wall Mount |
| Power Method | DC 12V @ 1,5 A / 802.3af PoE |
| Max. Power Consumption | 17.3 watts |
| Dimension | 194 mm x 155 mm x 50 mm |
| Weight | 680 g |
| Operating Temperature | 0 to 45°C |
| Storage Temperature | -25 to 70°C |
| Operating Humidity | 10 to 90% non-condensing |
Notes :
-
All specifications are subject to change without notice.
-
The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.
CLICK HERE to access a Vigor AP906 Web Interface